Shop
Showing 361–375 of 578 results
-
IC and IC Sockets
NE555N Timer IC
NE555N Timer IC Features:
- LOW TURN-OFF TIME
- MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz
- TIMING FROM MICROSECONDS TO HOURS
- OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
- HIGH OUTPUT CURRENT CAN SOURCE OR SINK 200mA
- ADJUSTABLE DUTY CYCLE
- TTL COMPATIBLE
- TEMPERATURE STABILITY OF 0.005% PER°C
SKU: n/a -
Modules and Motors
NEO 6M GPS Module
NEO 6m GPS Module Specifications:
- Supply voltage: 3.3V – 5V DC
- Operating current: 45mA
- Baud rates: 9600 (configurable from 4800 to 115200)
- Navigation update rate:Â 5Hz maximum (1HZ default)
- Capture time:Â Cool start: 27s (fastest)ï¼›Hot start: 1s
- Operating temperature range: -40 to +85°C
- Separated 18 X 18mm GPS antenna
- Dimension:Â 22 X 30 X 13mm
- Weight:Â 19g
SKU: n/a -
Modules and Motors
NEO 6M V2 GPS Module U BLOX
NEO 6M V2 GPS Module U BLOX Features
- U Blox NEO 6M GPS module with antenna and build-in EEPROM
- This module is compatible with APM2 and APM2.5
- and EEPROM can save all your configuration data.
- The battery Model is MS621FE Need to welding
- Battery not included.
- Interface: RS232 TTL
- Power: 3-5V
- Baudrate default:9600bps
SKU: n/a -
Tools & Instruments
NLBA1 Laptop Battery Analyzer Price in Pakistan
NLBA1 Laptop Battery Analyzer and Repair Tool Specifications:- Reads inner battery information stored inside the battery controller (even if the battery is over-discharged and the chip is not powered. The device generates an output voltage to power up the battery)
- Calculates battery health
- Detects if a chip is locked (battery not working in the laptop) or unlocked
- Detects the chip name
- Automatic pinout detection based on battery part number (more than 1000 battery part numbers in the database)
- Charges the battery with a lot of custom parameters (3.0 A maximum charging current)
- Discharges the battery with a lot of custom parameters (-3.0 A minimum discharging current)
- Track the cells voltage curves on graph during discharging
- Measures the real battery capacity
- Displays the correct voltage for each group of cells connected inside the battery (you will know exactly which cells are under discharged and how good they are)
- Calibrate / auto-cycle with many options (from time to time, laptop batteries need to have a calibration cycle 100%-0%-100% in order to display accurate battery status)
- Checks each Li-ion cell individually and displays which is GOOD, POOR or BA
SKU: n/a -
Modules and Motors
NodeMCU ESP8266 V1 Board
NodeMCU ESP8266 V1 Board Key Features:
- Microcontroller:Â Â Â ESP-8266 32-bit
- Clock Speed:Â Â Â Â Â Â Â 80 MHz
- USB Converter:Â Â Â Â CP2102
- USB Connector:Â Â Â Â Micro USB
- Operating Voltage:Â 3.3V
- Flash Memory:Â Â Â Â Â 4 MB
- Digital I/O:Â Â Â Â Â Â Â Â 11
- Analog Inputs:Â Â Â Â Â 1
- Communications:   Serial, SPI. I2C and 1-Wire via software libraries
- WiFi:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Built-in 802.11 b/g/n
SKU: n/a -
Modules and Motors
NodeMCU ESP8266 V3 Board
NodeMCU ESP8266 V3 Board Specifications & Features
- Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
- USB-TTL based on CP2102 is included onboard, Enabling Plug n Play
- PCB Antenna
- Small Sized module to fit smartly inside your IoT projects
SKU: n/a -
LCDs
Nokia 5110 MonoChrome LCD
Nokia 5110 MonoChrome LCD Specifications:
- Display Size: 48 x 84 pixels.
- Display Type: Monochrome LCD.
- Backlight: Adjustable backlight with brightness control.
- Communication Interface: SPI (Serial Peripheral Interface).
- Controller: PCD8544.
- Operating Voltage: 2.7V to 3.3V.
- Power Consumption: Low power consumption for energy-efficient operation.
- Dimensions: Compact dimensions for easy integration into electronic projects.
- Operating Temperature: Suitable for a wide range of temperature conditions.
- Compatibility: Compatible with various microcontrollers and development platforms.
Â
SKU: n/a -
Sensors
Non-Invasive AC Current Sensor (30A Max)
Non Invasive AC Current Sensor 30A Max Specifications:
- Input Current: 0~30A AC
- Output Mode: DC 0~1V
- Non-linearity：2-3%
- Build-in sampling resistance（RL): 62Ω
- Turn Ratio: 1800:1
- Resistance Grade: Grade B
- Work Temperature: -25°C ~ ﹢70°C
- Dielectric Strength(between shell and output): 1000V AC/1min 5mA
- Leading Wire in Length: 1m
- Open Size: 13mm x 13mm
SKU: n/a -
STM Boards
NUCLEO-F103RB Board STM32
NUCLEO F103RB Board Features:
- Model Number: NUCLEO-F103RB
- For use with Development board for STM32 F1 series
- Onboard microcontroller: STM32F103RBT6
- Features: Embedded ST-Link debugging tool (with SWD connector)
- STM32 microcontroller: STM32 microcontroller with LQFP64 package
- STM32F103RBT6: 128K FLASH
- Arduino Uno Revision: Arduino Uno Revision 3 connectivity
- embed-enabled: mbed.org
- USB VBUS or external source: 3.3 V, 5 V, 7 – 12 V
- Three LEDs: USB communication (LD1), user LED (LD2),
SKU: n/a -
STM Boards
NUCLEO-F401RE Board STM32
- Common features
- STM32 microcontroller in an LQFP64 or LQFP48 package
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- ARDUINO® Uno V3 expansion connector
- ST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24Â MHz or 48Â MHz HSE
- User USB Device full speed, or USB SNK/UFP full speed
- Cryptography
- Board connectors:
- External SMPS experimentation dedicated connector
- USB Type-C®, Micro-B, or Mini-B connector for the ST-LINK
- USB Type-C® user connector
- MIPI® debug connector
SKU: n/a - Common features
-
STM Boards
NUCLEO-F446RE Board STM32
- Common features
- STM32 microcontroller in an LQFP64 or LQFP48 package
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- ARDUINO® Uno V3 expansion connector
- ST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24Â MHz or 48Â MHz HSE
- User USB Device full speed, or USB SNK/UFP full speed
- Cryptography
- Board connectors:
- External SMPS experimentation dedicated connector
- USB Type-C®, Micro-B, or Mini-B connector for the ST-LINK
- USB Type-C® user connector
- MIPI® debug connector
SKU: n/a - Common features
-
STM Boards
NUCLEO-F446ZE Board STM32
- Common features
- STM32 microcontroller in an LQFP144 package
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- SWD
- ST Zio expansion connector including ARDUINO® Uno V3
- ST morpho expansion connector
- Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
- Board-specific features
- External or internal SMPS to generate Vcore logic supply
- Ethernet compliant with IEEE-802.3-2002
- USB OTG full speed or SNK/UFP (full-speed or high-speed mode), depending on the USB connector type
- Board connectors:
- USB with Micro-AB or USB Type-C®
- Ethernet RJ45
SKU: n/a - Common features
-
STM Boards
NUCLEO-F746ZG Board STM32
- Common features
- STM32 microcontroller in an LQFP144 package
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:
- SWD
- ST Zio expansion connector including ARDUINO® Uno V3
- ST morpho expansion connector
- Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
- Board-specific features
- External or internal SMPS to generate Vcore logic supply
- Ethernet compliant with IEEE-802.3-2002
- USB OTG full speed or SNK/UFP (full-speed or high-speed mode), depending on the USB connector type
- Board connectors:
- USB with Micro-AB or USB Type-C®
- Ethernet RJ45
SKU: n/a - Common features
-
Modules and Motors
NY-D01 100A Spot Welder Control Board
NY D01 100A Spot Welder Control Board Features:Â
- The use of STM8 industrial control centre microcontroller.
- Strong and weak electricity through optocoupler insulation, safe operation.
- The power line and foot switch line adopt the bolt the quick connect terminal, which is more convenient and reliable.
- Input time, current using a high-precision simple potentiometer, to ensure reliable, convenient input
- On-board power supply, state, foot, trigger indicator, and work status clearly visible.
- The design of a reliable zero-crossing detection circuit to ensure that the SCR phase shift accuracy.
- The controller is compatible with 100A scr.
- Digital control interface, you can display the current time and current settings.
- Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%),
SKU: n/a
