Zigbee Boards
XBEE Breakout Board Zigbee
XBEE Breakout Board Zigbee Features
- Industry’s fastest path to embedded cellular connectivity
- Smallest end-device certified embedded cellular modem on the market
- Pre-certified, Verizon end-device certified, and pre-provisioned on the cellular network</li></li>
- Authentic 20-pin XBee Through-Hole form factor
- Standard XBee AT and API interfaces
- 3.3 V power for battery-powered applications
- OTA firmware updates
- SSL/TLS for secure communications
- Configure locally with XCTU or remotely with Digi Remote Manager
₨700
CompareXBEE Breakout Board Zigbee is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1″ standard spacing dual row header. The spacing between 0.1″ headers is 0.5″ making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (you’ll need 2!) and 0.1″ headers below.
XBEE Breakout Board price in Pakistan
</p>
Based on 0 reviews
Be the first to review “XBEE Breakout Board Zigbee”
You must be logged in to post a review.
Related products
-
Zigbee Boards
ZigBee Dongle
ZigBee Dongle Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10° to 50°C
- Dimension: 89 x 27.8 x 12.7 mm
SKU: zigbee-dongle -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency:Â ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Breakout Boards
TB6560 3A Single-Axis CNC Router Stepper Motor Driver Board
Specification:
- Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H)
- Rated maximum output: ± 3A, peak 3.5A
- Working voltage: DC 10V-35V
- Recommended to use a switching power supply: DC24V power supply is used in it.
- Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions.
="text/javascript">>
SKU: n/a -
Zigbee Boards
XBEE Arduino Shield
XBEE Arduino Shield Features:
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- The reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
SKU: n/a
There are no reviews yet.