Water Level Sensor
Water Level Sensor Applications
- Flood and spill alarms.
- Rain barrel monitoring.
- Reservoir monitoring.
- Environmental monitoring.
- Water conservation applications.
- Mechanical float replacement.
- Electronic toilets.
- Aquaponics.
- Monitoring of Aquariums.
- Sensor for Internet of Things.
₨90
CompareA water level sensor is used to detect the level of substances that can flow. Such substances include liquids, slurries, granular material and powders. Level measurements can be done inside containers or it can be the level of a river or lake. Such measurements can be used to determine the amount of materials within a closed container or the flow of water in open channels.
RS Hydro have a wide range of pressure, ultrasonic, open channel, radar and capacitance level sensors and transmitters for sale and hire. For more information about the level sensors and transmitters we supply please select from one of the options below:
| Weight | 2 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
Based on 0 reviews
Be the first to review “Water Level Sensor”
You must be logged in to post a review.
Related products
-
Modules and Motors
Serial Mp3 Module Sensor
Features:
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: n/a -
Sensors
DS18B20 Sensor Digital Temperature Sensor
DS18B20 Sensor Specifications
- Programmable Digital Temperature Sensor
- Communicates using 1-Wire method
- Operating voltage: 3V to 5V
- Temperature Range: -55°C to +125°C
- Accuracy: ±0.5°C
- Output Resolution: 9-bit to 12-bit (programmable)
- Unique 64-bit address enables multiplexing
- Conversion time: 750ms at 12-bit
- Programmable alarm options
- Available as To-92, SOP and even as a waterproof sensor
SKU: n/a -
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Sensors, Modules and Motors
BMP180 Barometric Pressure Sensor Module
BMP180 Barometric Pressure Sensor Module Specifications:
- Pressure Range: 300 hPa to 1100 hPa (9000 meters to -500 meters above sea level)
- Pressure Accuracy: ±0.12 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±2°C
- Resolution:
- Pressure: 0.01 hPa
- Temperature: 0.1°C
- Operating Voltage: 1.8V to 3.6V
- I2C Address: 0x77 (0xEE for write, 0xEF for read)
- Dimensions: Compact form factor with standard mounting holes for easy integration (specific dimensions vary by manufacturer).
<script src="moz-extension://f26db0f4-f100-4dfb-9692-7da94f91d630/js/app.js" type="text/javascript">
SKU: n/a
There are no reviews yet.