Max232 IC
Max232 IC Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
₨60
CompareMax232 IC is designed by Maxim Integrated Products. This IC is widely used in RS232 Communication systems in which the conversion of voltage level is required to make TTL devices to be compatible with PC serial ports and vice versa.
This chip contains charge pumps which pump the voltage to the Desired Level. It can be powered by a single +5 volt power supply and its output can reach +_7.5 volts. MAX232 comes in 16 Pin Dip and many other packages and it contains Dual Drivers.
It can be used as a hardware layer converter for 2 systems to communicate simultaneously. Max232 is one of the versatile ICs to use in most of the signal voltage level conversion problems.
Max232 Converter price in pakistan
Based on 0 reviews
Be the first to review “Max232 IC”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
ADC0832 Converter 8-Bit Analog to Digital
ADC0832 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Analog and Digital Converters
DAC0831 Converter 8-Bit Analog to Digital
DAC0831 Converter 8-Bit Analog to Digital Features:
- Double Buffered, Single Buffered or Flow- Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Directly Interfaces to all Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust
- Works with ±10V Reference Full 4-Quadrant Multiplication
- Can be Used in the Voltage Switching Mode
- Logic Inputs are TTL Compatible
SKU: n/a -
Analog and Digital Converters
MCP2551 High-speed CAN Transceiver
Features
- Slope control input
- Supports 1 Mb/s operation
- Implements ISO-11898 standard physical layer requirements
- Suitable for 12V and 24V systems
- Externally-controlled slope for reduced RFI emissions
- Permanent dominant detect
- Low current standby operation
- High noise immunity due to differential bus implementation
SKU: n/a -
Analog and Digital Converters
ADC0831 Converter 8-Bit Analog to Digital
ADC0831 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog and Digital Converters
DAC0808 Converter 8-Bit Analog to Digital
DAC0808 Converter 8-Bit Analog to Digital Features:
- Part Number: DAC0808; Resolution: 8; DAC channels: 1; Interface: Parallel; Architecture: Multiplying DAC
- Output type: Unbuffered Current; Output range Max: 4.2(mA/V); Output range (Min): 0 (mA/V); Settling time: 0.15 µs
- Current Output; Relative accuracy: ±0.19% error maximum; Full-scale current match: ±1 LSB typ; Fast settling time: 150 ns typ
- Noninverting digital inputs are TTL and CMOS compatible; High speed multiplying input slew rate: 8 mA/µs; Power supply voltage range: ±4.5V to ±18V; Low power consumption: 33 mW @ ±5V; Operating temperature range: 0 ~ 70°C; Package DIP-16
- Package contains: 1 DAC0808 IC
SKU: n/a
There are no reviews yet.