Analog and Digital Converters
DAC0808 Converter 8-Bit Analog to Digital
DAC0808 Converter 8-Bit Analog to Digital Features:
- Part Number: DAC0808; Resolution: 8; DAC channels: 1; Interface: Parallel; Architecture: Multiplying DAC
- Output type: Unbuffered Current; Output range Max: 4.2(mA/V); Output range (Min): 0 (mA/V); Settling time: 0.15 µs
- Current Output; Relative accuracy: ±0.19% error maximum; Full-scale current match: ±1 LSB typ; Fast settling time: 150 ns typ
- Noninverting digital inputs are TTL and CMOS compatible; High speed multiplying input slew rate: 8 mA/µs; Power supply voltage range: ±4.5V to ±18V; Low power consumption: 33 mW @ ±5V; Operating temperature range: 0 ~ 70°C; Package DIP-16
- Package contains: 1 DAC0808 IC
₨100
CompareThe DAC0808 Converter is an 8-bit monolithic digital-to-analog converter (DAC) featuring a full-scale output current settling time of 150 ns while dissipating only 33 mW with ±5V supplies.
No reference current (IREF) trimming is required for most applications since the full-scale output current is typically ±1 LSB of 255 IREF/256. Relative accuracies of better than ±0.19% assure 8-bit monotonicity and linearity while zero level output current of less than 4 µA provides 8-bit zero accuracies for IREF>=2 mA.
The power supply currents of the DAC0808 are independent of bit codes and exhibit essentially constant device characteristics over the entire supply voltage range.
Based on 0 reviews
Be the first to review “DAC0808 Converter 8-Bit Analog to Digital”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
DAC0831 Converter 8-Bit Analog to Digital
DAC0831 Converter 8-Bit Analog to Digital Features:
- Double Buffered, Single Buffered or Flow- Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Directly Interfaces to all Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust
- Works with ±10V Reference Full 4-Quadrant Multiplication
- Can be Used in the Voltage Switching Mode
- Logic Inputs are TTL Compatible
SKU: n/a -
Modules and Motors, Analog and Digital Converters
LTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Modules and Motors, Analog and Digital ConvertersLTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Specifications:
- Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage when used please make sure input is lower than 30V, otherwise will burn out.)
- Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
- Maximum input current: 10A (peak current)
- Continuous Current: 6A
- Size: 67cm(L) * 42cm(W) * 18cm(H)
- Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin: input voltage, Iin: input current)}
- Weight: 35g
- Color: Red
- Voltmeter Accuracy: ± (5 ‰ + 1 digit)
- Static power consumption: Typical about 15mA(With the input voltage, output voltage and the color closely related to the digital pipe. The actual current there is a deviation)
- IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.
SKU: n/a -
Analog and Digital Converters
ADC0809 Converter 8-Bit Analog to Digital
ADC0809 Converter 8-Bit Analog to Digital Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog and Digital Converters
ADC0831 Converter 8-Bit Analog to Digital
ADC0831 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Modules and Motors
USB to RS485 Converter
USB to RS485 Converter Specifications:
- Interface: USB 2.0
- RS485 Communication: Half-duplex
- Data Transfer Rates: Up to 115200 bps
- Power: USB bus-powered, no external power supply required
- Operating Temperature: -10°C to 85°C
- LED Indicators: Power and Data Transmission
- Compatibility: Windows, Linux, and macOS
- Dimensions: Compact form factor for easy integration
- Housing Material: High-quality and durable materials for industrial use
SKU: n/a
There are no reviews yet.