Sensors, Arduino, Modules and Motors
Arduino KY-032 Obstacle Avoidance Sensor Module
Arduino KY 032 Sensor Module Specifications:
- Operating Voltage: 3.3V to 5V
- Detection Range: Adjustable, typically 2cm to 30cm
- Operating Current: <25mA
- Output Type:
- Digital Output (D0): High/Low signal indicating obstacle presence
- Analog Output (A0): Voltage proportional to the distance from the obstacle
- Indicator: Built-in status LED
- Dimensions: 30mm x 14mm x 8mm (L x W x H)
- Mounting Holes: Yes, for convenient installation
- Interface: 3-pin header for easy connection to Arduino
- Material: Quality materials for durability and reliability in various environments.
₨250
Compare
Based on 0 reviews
Be the first to review “Arduino KY-032 Obstacle Avoidance Sensor Module”
You must be logged in to post a review.
Related products
-
Sensors, Arduino
Arduino RPM Sensor For Measuring Rotational Speed
Arduino RPM Rotational Speed Measuring Sensor Specifications:
- Operating Voltage: 5V DC
- Operating Current: <20mA
- Rotational Speed Range: 0 to 30,000 RPM
- Output Signal Types: Analog and Digital (TTL)
- Sensor Type: Non-Contact Magnetic Sensor
- Resolution: 1 RPM
- Interface: Compatible with Arduino (Analog and Digital Pins)
- Dimensions: Compact design for easy integration (specific dimensions may vary)
SKU: n/a -
Arduino
Arduino Pro Mini 328 3.3V/8MHz
Arduino Pro Mini 328 Specifications:
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- 0.8mm Thin PCB
- USB connection off board
- Weighs less than 2 grams!
- Supports auto-reset
- 3.3V regulator
- Max 150mA output
- Over current protected
- DC input 3.3V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- 0.7×1.3″ (18x33mm)
SKU: n/a -
Arduino
Arduino TFT Display 3.2 Inch LCD
Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a
There are no reviews yet.