Analog and Digital Converters
ADC0804 Converter 8-Bit Analog to Digital
ADC0804 Converter 8-Bit Analog to Digital Features
- 0V to 5V analog input voltage range with a single 5V supply
- Compatible with microcontrollers, access time is 135 ns
- Easy interface to all microprocessors
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- No zero adjust required
- 0.3[Prime] standard width 20-pin DIP package
- Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span-adjusted voltage reference
- Differential analog voltage inputs
₨1,270
CompareADC0804 is a very commonly used 8-bit analog-to-digital converter. It works with 0V to 5V analog input voltage. It has a single analog input and 8-digital outputs. Conversion time is another major factor in judging an ADC, in ADC0804 conversion time varies depending on the clocking signals applied to CLK R and CLK IN pins, but it cannot be faster than 110 μs.
We already know that analogue-to-digital (ADCs) converters are the most widely used devices for information securing to translate the analog signals to digital numbers so microcontrollers can read them easily. There are many ADC converters like ADC0801, ADC0802, ADC0803, ADC0804 and ADC080.
“>
Based on 0 reviews
Be the first to review “ADC0804 Converter 8-Bit Analog to Digital”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
ADC0832 Converter 8-Bit Analog to Digital
ADC0832 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Modules and Motors, Analog and Digital Converters
LTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Modules and Motors, Analog and Digital ConvertersLTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Specifications:
- Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage when used please make sure input is lower than 30V, otherwise will burn out.)
- Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
- Maximum input current: 10A (peak current)
- Continuous Current: 6A
- Size: 67cm(L) * 42cm(W) * 18cm(H)
- Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin: input voltage, Iin: input current)}
- Weight: 35g
- Color: Red
- Voltmeter Accuracy: ± (5 ‰ + 1 digit)
- Static power consumption: Typical about 15mA(With the input voltage, output voltage and the color closely related to the digital pipe. The actual current there is a deviation)
- IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.
SKU: n/a -
Analog and Digital Converters
Mini MP1584EN DC-DC Buck Converter Adjustable Power Supply Module
- Specifications:
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V (adjustable)
- Output Current: Up to 3A
- Conversion Efficiency: Up to 92%
- Adjustment Method: Potentiometer for precise voltage adjustment
- Dimensions: Compact form factor, suitable for space-constrained projects
- Protection: Overcurrent protection
- Application: Ideal for Arduino projects requiring variable power supply voltages
- Operating Temperature Range: -40°C to +85°C
- Connector Type: Standard header pins for easy integration into breadboards and projects.
SKU: n/a - Specifications:
-
Analog and Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog and Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
DC 4.5-40V USB Charger Converter Voltmeter Module Specifications:
- Input Voltage Range: 4.5V – 40V
- Output Voltage: 5V
- Output Current: Up to 2A
- Conversion Efficiency: >90%
- Display Accuracy: ±0.1V
- Operating Temperature: -40°C to +85°C
- Dimensions: (L x W x H) 60mm x 21mm x 14mm
- Weight: 15g
- Protection: Overcurrent, Overvoltage, Short Circuit
- Connector Type: Screw terminals for input and output
- Display Type: LED Voltmeter
SKU: n/a -
Analog and Digital Converters
ADC0808 Converter 8-Bit Analog to Digital
ADC0808 Converter 8-Bit Analog to Digital Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a
There are no reviews yet.