The ADC0800 is an 8-bit monolithic A/D converter using P-channel ion-implanted MOS technology. It contains a high input impedance comparator, 256 series resistors and analog switches, control logic and output latches. Conversion is performed using a successive approximation technique where the unknown analog voltage is compared to the resistor tie points using analog switches. When the appropriate tie point voltage matches the unknown voltage, conversion is complete and the digital outputs contain an 8-bit complementary binary word corresponding to the unknown. The binary output is TRI-STATEÉ to permit bussing on common data lines. The ADC0800PD is specified over b55§C to a125§C and the ADC0800PCD is specified over 0§C to 70§C.
Analog and Digital Converters
ADC0800 Converter 8-Bit Analog to Digital
ADC0800 Converter 8-Bit Analog to Digital Features
- Low cost
- +5V, 10V input ranges
- No missing codes
- Ratiometric conversion
- TRI-STATE outputs
- Fast TC 50 ms
- Contains output latches
- TTL compatible
- Supply voltages 5V DC and b12V DC
- Resolution 8 bits
- Linearity +1 LSB
- Conversion speed 40 clock periods
- Clock range
₨100
Compare
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “ADC0800 Converter 8-Bit Analog to Digital” Cancel reply
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
Max487 IC
0 out of 5(0)Max487 IC Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
SKU: n/a - Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
-
Analog and Digital Converters
MAX488 IC
0 out of 5(0)MAX488 IC Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
SKU: n/a - Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
-
Analog and Digital Converters
RS232 To RS485 Serial Communication Data Converter
0 out of 5(0)RS232 To RS485 Converter Specifications:
- Protocol Support:
- RS232 (Recommended Standard 232)
- RS485 (Recommended Standard 485)
- Voltage Range:
- Input: 5V to 24V DC
- Output: 5V to 24V DC
- Data Rate:
- Supports configurable data rates up to [specified maximum rate] bps (bits per second).
- Operating Temperature:
- Suitable for operation in a temperature range of [specified range] degrees Celsius.
- Dimensions:
- Compact design with dimensions of [specified dimensions] for easy integration into various setups.
- Connectors:
- RS232: [Type of connector]
- RS485: [Type of connector]
- Indicators:
- Power LED: [Indicator description]
- TX LED: [Indicator description]
- RX LED: [Indicator description]
- Protection:
- Built-in surge protection to safeguard connected devices.
- Mounting:
- DIN rail mountable for easy and secure installation.
SKU: n/a - Protocol Support:
-
Analog and Digital Converters
Max232 IC
0 out of 5(0)Max232 IC Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: Max232-Converter - RS-232 Bus-Terminal ESD Protection Exceeds
-
Modules and Motors, Analog and Digital Converters
LTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Modules and Motors, Analog and Digital ConvertersLTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
0 out of 5(0)Specifications:
- Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage when used please make sure input is lower than 30V, otherwise will burn out.)
- Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
- Maximum input current: 10A (peak current)
- Continuous Current: 6A
- Size: 67cm(L) * 42cm(W) * 18cm(H)
- Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin: input voltage, Iin: input current)}
- Weight: 35g
- Color: Red
- Voltmeter Accuracy: ± (5 ‰ + 1 digit)
- Static power consumption: Typical about 15mA(With the input voltage, output voltage and the color closely related to the digital pipe. The actual current there is a deviation)
- IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.
SKU: n/a₨1,150₨1,500
There are no reviews yet.