A4988 Stepper Motor Driver
Specifications:
- Input Voltage Range: 8V to 35V
- Maximum Output Current: 2A per phase (with proper heatsinking)
- Logic Voltage: 3.3V or 5V (compatible with most microcontrollers)
- Step Modes: Full, 1/2, 1/4, 1/8, 1/16 micro-stepping
- Dimensions: Compact PCB design, suitable for integration into various projects
- Operating Temperature Range: -20°C to 85°C
- Protection Features: Thermal shutdown, crossover-current protection
- Control Interface: Step and direction control
- PCB Layers: 4-layer, high-quality PCB for reliable performance
- Connector Type: Compatible with standard stepper motor connectors, facilitating easy integration into existing systems.
₨220
CompareThe A4988 Stepper Motor Driver is a compact and versatile stepper motor driver module designed to provide precise and efficient control for various stepper motors. It is widely used in 3D printers, CNC machines, and other applications that require accurate and controlled motion. The A4988 driver is known for its reliability and ease of use, making it a popular choice among hobbyists and professionals alike.
A4988 Stepper Motor Driver price in pakistan
Based on 0 reviews
Be the first to review “A4988 Stepper Motor Driver”
You must be logged in to post a review.
Related products
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
Modules and Motors
L6203 Motor Driver Dual Full Bridge
L6203 Motor Driver Features
- SUPPLY VOLTAGE UP TO 48V
- 5A MAX PEAK CURRENT (2A max. for L6201)
- TOTAL RMS CURRENT UP TO:4A
- RDS (ON) 0.3 Ω (typical value at 25 °C)
- CROSS CONDUCTION PROTECTION
- TTL COMPATIBLE DRIVE
- OPERATING FREQUENCY UP TO 100 KHz
- THERMAL SHUTDOWN
- INTERNAL LOGIC SUPPLY
- HIGH EFFICIENCY
SKU: n/a -
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a -
Modules and Motors
MAX6675 Module K-Type Thermocouple
MAX6675 Module Specifications:
- Thermocouple temperature range: 0 to 450oC
- Module sensor temperature range (oC): 0 to 1024
- Temperature resolution (oc): 0.25
- Module supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16-bit SPI compatible.
- Thermocouple accuracy (0-700oC): 8 LSBs
- Thermocouple disconnect detection.
SKU: n/a
There are no reviews yet.