150W Boost Converter DC-DC 10-32V to 12-35V Step Up
- Size: 10-32V to 12-35V
- Module Properties: non-isolated step-up module (BOOST)
- 65 * 56.5 * 23 (length * width * high) (mm)
- Input voltage:10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 6A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)
- Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
- Easy to drive 65W 90W dual-core notebook.
- Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45¡ãc
- Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
- Output Ripple: 2% (MAX) 20M-bandwidth
- Operating Temperature: Industrial (-40¡ãc to +85¡ãc) (ambient temperature exceeds 40¡ãc, lower power use, or to enhance heat dissipation)
- Full load temperature rise: 45¡ãc
- No-load current: 25mA typical
- Voltage regulation: ¡À 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please Install fuses and protection circuits at the Input port.)
₨600
Compare150W Boost Converter DC-DC 10-32V to 12-35V Step Up
The 150W Boost Converter DC-DC 10-32V to 12-35V Step Up package includes a power Boost Module 150W. This module allows you to step up an input voltage as low as 10V and set the output to 12V-35V. The output voltage will be higher than the input voltage.
The boost converter design is based on the popular Texas Instrument’s UC3844 current mode PWM controller chip.
Applications:
DIY an adjustable on-board power supply, you just input DC 12V, then you can get output DC 12V-35V (adjustable), But the output voltage can not below the input voltage.
DIY a booster charger.
Provide power for your electronic equipment.
Use Solar battery charging for the electric accumulator.
Some Applications:
1. DIY an output adjustable vehicle power supply, connect the 12V input, and the output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook needs.
Based on 0 reviews
Be the first to review “150W Boost Converter DC-DC 10-32V to 12-35V Step Up”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
A3144EUA Sensor
A3144EUA Sensor FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
-
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a
There are no reviews yet.